INKBIRD Combo Set Pre-wired Digital Dural Stage Humidity Controller IHC200 and Heating Cooling Temperature Controller ITC-308
Features of ITC-308
-
Plug and play design, easy to use;
-
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
-
Support reading with Centigrade or Fahrenheit unit;
-
Maximum output load: 1000W(110V)/2000W(220V);
-
Dual display window, be able to display measured temperature and set temperature at the same time;
-
Temperature calibration;
-
Compressor delay protection for refrigeration control;
-
High and low temperature alarms are available;
-
Over-temperature and sensor fault alarm;
-
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Description of ITC-308
Specification:
-
Temperature Control Mode :On/Off Control, Heating and Cooling
-
Temperature Control Range : -50~99 °C / -58~210 ° F
-
Temperature Resolution: 0.1 ° C / 0.1° F
-
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
-
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
-
Input Power: 100 ~240VAC, 50Hz/60Hz
-
Temperature Control Output: Max. 10A, 100V ~240V AC
-
Input Power Cable Length: 1.5m (5ft)
-
Output Power Cable Length: 30cm (1ft)
-
Buzzer Alarm: High and Low Temperature Alarm
-
Sensor Type: NTC sensor (Including)
-
Sensor Length: 2m / 6.56ft
-
Relay Capacity: Cooling/ Heating (10A, 100-240VAC)
-
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
-
Storage Humidity: 20~85% (No Condensate)
-
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
-
Warranty: 1Year
Description of IHC-200
It is an easy-to-use, safe and reliable dual relay output humidity controller. Its play-n-plug designed: Plug it into wall socket, set your controller’s humidification or dehumidification values to your need. It can maintain the humidity between humidification and dehumidification automatically. In addition, the humidifier and dehumidifier can be programmed separately, too.
The maximum electrical load is 10A. It can fit many residential humidifier and dehumidifier. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chanmber, snake cage, tobacco cage and so on.
-
Switch the modes between humidification and dehumidification automatically;
-
Control humidity by setting value and differential value;
-
Calibrate the humidity value;
-
Delay protection for control output;
-
Query current temperature;
-
Alarm when humidity exceeds high/low humidity setting value;
-
Alarm when sensor error or humidity exceeds limit;
Specification:
-
Power Input: 100 ~240VAC, 50Hz/60Hz
-
Power Output: Max. 10A, 100V ~240V AC
-
Humidity Measuring Range : 5%-99.99%RH
-
Humidity Control Range : 5%-99%RH
-
Resolution: 1%RH
-
Accuracy: ±3%RH
-
Sensor model: AM-2301
-
Sensor stability: <0.5%RH/yr
-
Sensor Length: 2m / 6.56ft
-
Relay Contact Capacity
-
Humidification (12A, 100-240VAC)
-
Dehumidification (12A, 100-240VAC)
-
Input Power Cable Length: 1.5m (5ft)
-
Output Power Cable Length: 30cm (1ft)
-
Dimension: Body: 140x68x33mm (5.5×2.7×1.3inch)
-
Socket: 85x42x24mm(3.3×1.7x1inch)
-
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
-
Storage: Temperature -30~ 75 ° C / -22~ 167 ° F
-
Humidity 20~85% (No Condensate)
-
Warranty: 1 Year
Package:
-
1 x humidity controller IHC-200
-
1 x ITC-308 Controller
-
1 x IHC-200 User Manual
-
1 x itc-308 User manual
Please choose the right plug and socket type before you order it.
Reviews
There are no reviews yet.