This New Version V0.4.5.1 Spectrum Analyzer with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service lifecan directly record data to the card ,which is convenient for your data sharing and storage.
[2 in 1 Multifunctional Frequency Analyzer & Signal Generator]:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
[PC Control]:Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator. Tinysa-APP transfers data directly to the computer. The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface.
These command can be used to perform measurements or update internal settings.
The driver for Windows will install automatically after connecting to a Windows PC.
The driver for Linux is built into the kernel.
[200Hz-850kHz RBW]:The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test.
Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA).
Material: ABS
colour: black
Package Contents:
1 x Tinysa ULTRA Spectrum Analyzer;
2 x 30cm ALSR100 SMA cables
1 x USB Type-C data cable
1 x SMA-SMA barrel connector
1 x TLanyard and touch plectrum
1 x Antenna with SMA connector
1 x 32GB MicroSD card(plugged in the host)
|
|
Reviews
There are no reviews yet.