CNC 2200w 2.2kw 24000RPM Spindle Machine Tool 4 x ceramics bearings air cooling spindle motor +inverter VFD +13 pcs ER20 collets

1.0-24000rpm ultra-high speed

 2.Four high-quality bearings

 3.Run silent

 4.High temperature resistance

 5.long life

		Aviation Connector
		Cooling Fan
		Metal body
		Parameter
		Lengthened rotor
		Chuck

MOTORE ASINCRONO TRIFASE/ASYNCHRONOUS 3 PHASE MOTOR

Spindle		Fail
V（±10%）	220	V（±10%）
Hz	400	Hz
rpm	24000	rpm
KW (HP)	2.2	KW (HP)
A	6	A
IS .F	Poli:2	TA :20℃	Serv:S1
=0.8	Cosφ0.7	IP：50	Air Cooling

HY Inverter/VFD

			LED Display zone indicating For., Rev.,frequency,current,recolution, etc.
			Main display zone indicating frequency,current,ACV ,DC V,revolution,counter,temperature,etc
			Speed controller
			Function key
			Set Key (enter)
			Value Change key
			Stop/Reset key
			Run key
			FOR/REV Switch
			(DISP) Shift key

Tech parameters
Power:2.2KW	Input Voltage :220V
Input Frequency :50/60Hz	Input Phase : 1phase
Output Voltage : 220V	Output Phase : 3pahse
Output Current :10A	Output Frequency: 400Hz
Control  Method : V/F control; Open-loop fiux vector control

Function description of Main circuit terminals

symbol	Function Desaiption
R S T	Input terminal of AC line power.(220V class,for both single、three phase, single phase connected to any two phases)
U.V.W	Output terminal of the inverter
P.Pr	Connector for braling resistor（optional)
E	Ground terminal:the third method of grounding for 220V ang special grounding for 380V of electrical engineering regulations.

YL Inverter/VFD

			Digital Dispaly
			Forward/renerse switch key
			Run key
			Stop Reset button
			Shift key
			Frequency adjustment key
			Programming key (forward/backward)
			Select/confirm key
			Up and down keys

The factory default setting of YL inverter is 400hz, no need to set it, it is suitable for our spindle motor

Terminal symbol	Decription
N  L	Power input terminal (220V inverter is single-phase 220V input,110V inverter issignle-phase 110V input)
U.V.W	Inverter output terminal（220V inverter is three-phase 220V output,110V inverter is three-phase 110V output)
+DB-	Braking resistor connection end optional (see page 27 for details on braking resistor confoguration)
FG	Frame Ground

Milling Cutter                         Sliding Table Air Cooled Spindle

Q1: The spindle has been running for a period of time and the temperature is very high. Is it normal? What is the working environment temperature range?

Answer: Mechanical products have very good heat resistance. The surface is normal within 150°c, and the suitable working environment temperature is -10°c ~ +50°c

Q2:Application of air-cooled spindle

Answer: This air-cooled spindle is suitable for woodworking, aluminum and some soft metals, and can be used with a variety of milling cutters

Q3: Number and material of bearings

Answer: 4 steel ball bearings, model C7002

Q4: Continuous working time

Answer: If the ambient temperature is in the normal range and the surface temperature of the spindle is within 150 degrees, it can work continuously without interruption.

Q5: Can the spindle run vulgarly?

Answer:Yes, the maximum speed of this spindle is 0-24000rpm, which is all possible within this range

Q6: Abnormal sound

Answer:If there are abnormal noises, most of them are bearing problems, because the bearing has a service life and is vulnerable to damage. According to different frequency and intensity of use, the bearing needs to be replaced after 0.5 to 1 year.