intelamp Solar Light Outdoor, Solar Motion Sensor Flood Security Lights with Remote Control Powered Outdoor Wall Light Solar Dusk to Dawn Garden Porch Farm Street Light Backyard Garage Light
Feature:
[Long Range Motion Sensor]
Each set of lamps includes an independent motion sensor, which will light up in advance within 100 feet when someone approaches the sensor. The lamp’s sensitive sensors will keep the light on high brightness until the person leaves. Also, the lamp will send a signal to trigger the same type of lamp within 100 feet to turn to high brightness.
[High Brightness and Long Lighting Time]
With a 22.5% high conversion rate solar panel and a 12000mAh safe battery, the lamp can be fully charged within 5 hours in strong sunshine to provide sufficient power. It can last for 4 hours at a brightness of over 2000LM when fully charged, far exceeding similar products. And when no one is around, it maintains a brightness of 400LM within a range of 1000 sqft, which is brighter than moonlight, A fully charged lamp can last up to 40 hours and light up for 4 hours even without sunlight.
[Intelligent Control]
The remote control of the lamp can select 30 seconds, 3 minutes, or 10 minutes of high-brightness lighting delay after motion sensing. The remote control can also be used to turn the light on/off, adjust the brightness, and select the non-sensing constant-on mode.
[Solid Installation]
The solar panel and lamp can be installed securely with unique strong mounting accessories to walls, boards, or round and square posts.
[High-quality Material for Longer Service Life]
Long Range Motion Sensor
-
The long-range motion sensor solves the problem that the sensor light must be approached to light up
-
Each set of products has 2 solar sensor remote controls. When people approach the lamp, one or more solar lamps within 65 feet will turn to high brightness
-
The solar lamp itself has a sensor. When people approach the lamp, the lamp will turn to high brightness, and trigger the same type of lamp within 65 feet to turn to high brightness
Through the remote control choose different sensing delay
-
The lamp is charged during the daytime. Press the ON button to ensure the lamp is on and the lamp will turn on automatically at night.
-
Through the remote control, you can choose different sensing delay lighting times of lamps to meet different needs:
-
30S: Short time passing
-
3Min: General setting
-
10Min: BBQ/workplace/Long distance activities
-
The longer the delay time, the more power is consumed. It is recommended to choose 30 seconds delay time to ensure continuous lighting on rainy days.
No motion sensor mode
-
No motion sensor mode: The lamp works from dusk to dawn when turning off the sensor function.
-
Brightness adjustment: The lamp has three levels of adjustable brightness 100%, 80%, and 60% for all modes.
-
It is recommended to choose 100% in the sunny season and to choose 80%/60% in winter to ensure a longer lighting time.
-
The chosen mode will be automatically saved and the lamp works according to that
Installation method：
The lamp has a picture-rich manual and all installation accessories to ensure a smooth installation.
â‘ The distinctive metal fixing bracket keeps an 18-degree tilt angle for the solar panel, making it unchanged for a long time to higher charging efficiency, and rain can clear the floating dust on the surface.
â‘¡The solar panel can be perforated and installed on walls or strapped to posts.
â‘¢The solar panel should be installed in sunlight, especially towards the south.
â‘£The lamp has a rotatable bracket for installation at any angle, such as a wall, tree trunk, post, canopy, ground, or even upside-down shooting into the sky.
Note: The lamp is sealed with outdoor glue completely to achieve IP65 outdoor waterproofing, please do not try to take it apart.
Reviews
There are no reviews yet.