Garage Tool Car Dent Removal Repair Kit Slide Reverse Hammer 18+ Suction Cup Auto Body Paintless Dent Puller Extractor Tool

Garage Tool Car Dent Removal Repair Kit Reverse hammer 18+ suction cup Auto Body Paintless Dent Puller Repair Tool Slide Hammer

Why recommend it to you ?

new design , suitable for different size dents. Updated quality

High quality tools. automotive body repair tools.

newest packing design, more conveniently taking and operating. Each tool is high quality and good repution from professional user.

Faster making shipping and packing safety.

How to use:

1.Clean the dent with a clean wet cloth;

2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the

drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);

5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;

7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

8. Clean the repaired place with a clean wet cloth.

We provide alcohol bottles, alcohol needs to be obtained by customers themselves. Alcohol can wash away the glue from the car body.

Package Contents:

1* Car Dent Puller Tools kit as picture

Using Methods
1.Clean the dent with a clean wet cloth;2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger thedrawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;8. Clean the repaired place with a clean wet cloth.